返回 当前位置: 网站首页 ›› 功能独特 ›› 内容

联系Simgar

    Address: 1251 Avenue of Jinan High-tech Zone, No. Tianchen

    Sales
    电话:0531-81216111 Tel :0531-81216111
    81216131 81,216,131
    81216100 81,216,100
    传真:0531-81216121 Fax :0531-81216121

    Aftermarket, Parts Department
    电话:0531-81216122 Tel :0531-81216122
    传真:0531-81216129 Fax :0531-81216129

    Technical Support: 0531-81216101

    Service Complaints: 0531-81216114

    E-mail sigmar@sigmar.cn: 426709264:


    QQ

Super Programming


 1, in order to improve efficiency, reduce vibration, noise, motor wear and tear, increasing the scope of work or the scope of protection, the password can be programmed to configure your system to work a minimum speed value, the maximum rotational speed value and the overload current value.  For the rated interval 1000-10000r/min equipment, such as: If a piece is known only in 3500r/mi Department has a natural frequency, you can configure your system the minimum value, maximum speed of 3000r/min and 4000r, respectively / min.  In this way, after booting the system automatically and quickly stabilized at 3000r/min,, and in the vicinity of 3500r/min limitation, followed by l speed to 4000r/min automatically shut down when. If the workpiece is known to be a limitation can be 10180r/min at the minimum, maximum speed were set to 9600r/min, 11000r/min (motor can be short more than 10% of rated speed), so that the system can only be in the speed of range of work. Another example of a workpiece is always a peak overload, it can temporarily overload current value transfer large (no more than 10% of rated current) to complete the peak of limitation.
 2, in order to facilitate large with large motor, small pieces with a small motor, a master password through the key input of the exciter can match the variety of specifications, which can avoid using an external switch may be others but mal-burning motor.
 3, also designed the man-machine conversation function, programming can tell the current state of the host, suggesting that the next step, and misuse alarm.
 4, edit, print work date, craft cards.
 5 may be prepared, curing will increase process, fixed speed technology, steady rate process, the dynamic aging process, large structure workpiece treatment process, multi-peak treatment process, complex treatment process components and other auto-process.




Readers recommend that users refer to the following concepts:
Super Programming